Central Air Conditioner Installation in Acton, MA 01720

For the fantastic bulk of homes, central air conditioning installation is stuffed and too complex with risk to attempt without professional assistance. This is owing to the competence required, the governmental wrangling of permissions and licensing requirements, and the threat of voiding guarantees if the elements are set up wrongly.

What do Central Air Conditioners do?

A central air conditioner cools air in one area before distributing it throughout the house using the furnace’s air handling capabilities. This sets it apart from window or wall a/c or mini-split systems, which all chill relatively small locations and need lots of systems to cool the whole home.

Many single-family houses in the United States with central air conditioning use a split system. This indicates that the device is divided into two parts: an evaporator coil within a compressor and the house outside.

Working With Professional Central Air Conditioner Installers in Acton, MA

When consulting with contractors, ask about their method to the job. Pay attention to the questions they ask! An installer must ask clarifying questions so that your choices and decisions are represented in their quote and the end result.

Planning for Central Air Installation in in Acton

Setting up central air is a large endeavor that needs substantial preparation ahead of time. Demand that your contractor examine their treatment and confirm that they will deal with any required licenses or other essential documents.

Go over with your professional just how much you value energy efficiency above preliminary expenditure. This is also an exceptional moment to discuss the position of the condenser unit and the kind of thermostat you select.

Sizing for your Central Air Conditioner

Your contractor will assist you in determining the appropriate size central air conditioning conditioner for your home. A system that is too little will run practically continuously, whereas a unit that is too big will chill the house too quickly and shut off prior to finishing a complete cycle.

The fast on/off in the latter circumstance is taxing on the system. It can cause the evaporator coil to freeze, and a frozen coil prevents air from streaming. As a result, a big a/c unit may be less reliable at cooling than a smaller unit.

Your Air Conditioner installation will do a estimation called a “Manual-J” to determine the very best unit for your home. This will consider all of the parameters we’ve pointed out and more, leading to the most exact size possible.

However, we comprehend that many house owners like to have a basic notion of what size they need ahead of time. main air conditioner size: To get the Btu required, multiply the square video footage of your house’s conditioned location by 25, then divide by 12,000 to get the tonnage.

much of those windows, you might require more cooling.

Getting an Estimate for a Central Air Conditioner in Acton, MA 01720

As soon as you’ve gone over the standard strategy and talked about model possibilities, the specialist must offer you an estimate. As always, acquire composed estimates from numerous companies. The only exception would be if you’re installing air conditioning in a new home, since the builder will more than likely manage it.

When working with a contractor or independent HVAC professional, don’t be hesitant to look for clarifying information or request expenditure breakdowns. Even if the specialist is unable to detail whatever, they ought to be ready to communicate adequately to help you feel more at ease with the procedure.

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

• Duct work installation or modification
  • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
  • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
  • Duct work should be done before drywall is put in new construction.

• Interior unit
  • The evaporator coil is installed within the furnace plenum.
    • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
    • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”

• Exterior unit
  • Several considerations influence the positioning of the outside unit, including:
    • The distance between the inside unit and the electrical service panel;
    • The levelness of the ground;
    • The proximity of the loud external unit to windows or doors;
    • Distances needed by code from gas or water meters (refer to your local building department for specifics).

• Connect the line set
  • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
  • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
    • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
    • To avoid water infiltration, the penetration to the external should be sealed.

• Connect the Electrical Supply
  • An outside cutoff will be required for the condenser unit.
  • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
  • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
  • • If the project was planned properly, any work on the panel should already be included in the project estimate.
  • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.

• Condensate Drain Line
  • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
  • Units located in a basement typically run to a floor drain.
  • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.

• Thermostat
  • When installing central air conditioning in a new home, you must select a thermostat.
  • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
  • This is one phase in the process that is ideal for a little do-it-yourself effort.
    • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Costs vary based on the local market and the job details, similar to any substantial task. For labor and supplies, a common split system central air conditioning installation using an existing furnace could cost in between $3,000 and $7,000 or more. Usually, that expense will be split around 60/40, with labor accounting for bulk of it.

Bear in mind that you will most likely be paying complete retail rather than getting a business discount, so the whole expense of the project might not be cheaper than the contractor’s price quote. You’ll also have to perform your own sizing, and you’ll be held liable if there are any issues with the equipment.

dispose and eliminate of the old system and refrigerant if you’re replacing an existing central air system. When developing a furnace and cooling system, the expense of each element is frequently decreased, while the overall expense of the work is higher.

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Call 855-608-3406 Now!

Call 855-608-3406 Now!

Additional HVAC Services in Acton Ma 01720 Include:

• Boiler Repair in Acton Ma 01720
• HVAC Repair in Acton Ma 01720
• 24 Hour AC Repair in Acton Ma 01720

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

• Boilers and Radiators - New Install
• Boilers and Radiators - Repair
• Commercial Heat - New Install
• Commercial Heat - Repair
• Electric Heat - New Install
• Electric Heat - Repair
• Furnaces - New Install
• Furnaces - Repair
• Gas Heat - New Install
• Gas Heat - Repair
• Geothermal Systems
• Heat Pumps - New Install
• Heat Pumps - Repair
• Heating - New Install
• Heating - Repair
• Oil Heat - New Install
• Oil Heat - Repair
• Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.

• Air Ducts - Repair & Replace
• Central Air - Cleaning & Maintenance
• Central AC Installation in Acton Ma 01720
• Central Air - Repair
• Commercial Cooling
• Ductless Air Conditioning
• Thermostats