Central Air Conditioner Installation in Atlanta, GA 30315

For the great bulk of houses, central air installation is complicated and filled with threat to attempt without skilled support. This is owing to the competence needed, the administrative wrangling of permissions and licensing requirements, and the risk of voiding warranties if the parts are installed wrongly.

What do Central Air Conditioners do?

A main air conditioner cools air in one area prior to dispersing it throughout the residence using the furnace’s air handling abilities. This sets it apart from window or wall air conditioners or mini-split systems, which all chill relatively small areas and require numerous systems to cool the entire house.

Many single-family homes in the United States with main air use a split system. This suggests that the device is divided into two parts: an evaporator coil within a compressor and the home outside.

Central Air Conditioner Installation in Atlanta, GA 30315

Working With Professional Central Air Conditioner Installers in Atlanta, GA

When speaking to specialists, ask about their technique to the task. Also, take notice of the questions they ask! An installer needs to ask clarifying concerns so that your choices and decisions are represented in their price quote and the end result.

Planning for Central Air Installation in in Atlanta

Installing central air is a large endeavor that needs substantial preparation ahead of time. Demand that your professional inspect their treatment and confirm that they will deal with any required licenses or other essential documents.

Talk about with your specialist just how much you worth energy effectiveness above initial expense. This is likewise an outstanding minute to talk about the position of the condenser system and the kind of thermostat you select.

Sizing for your Central Air Conditioner

Your professional will help you in figuring out the suitable size central air conditioner for your home. A unit that is too small will run virtually constantly, whereas a system that is too big will chill the home too quickly and turn off prior to finishing a complete cycle.

The quick on/off in the latter circumstance is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil avoids air from streaming. As a result, a big ac system may be less reliable at cooling than a smaller unit.

Your Air Conditioner installation will do a computation referred to as a “Manual-J” to determine finest system for your home. This will consider all of the criteria we’ve discussed and more, resulting in the most exact size possible.

We comprehend that numerous house owners like to have a basic concept of what size they require ahead of time. Here’s a rough estimate of main air conditioner size: To get the Btu required, multiply the square footage of your house’s conditioned area by 25, then divide by 12,000 to obtain the tonnage.

Keep in mind that this is simply a basic estimate, and there are numerous factors. If your house’s very first floor has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Atlanta, GA 30315

Once you’ve gone over the standard plan and gone over model possibilities, the professional should use you an price quote. As constantly, acquire composed quotes from various suppliers. The only exception would be if you’re setting up a/c in a new home, because the home builder will most likely handle it.

Don’t be reluctant to seek clarifying information or demand expense breakdowns when dealing with a home builder or independent HVAC contractor. Even if the professional is not able to information everything, they should be prepared to interact adequately to help you feel more at ease with the treatment.

Central Air Conditioner Installation in Atlanta, GA 30315

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices vary based on the local market and the job information, just like any significant task. For labor and products, a normal split system central air conditioning installation utilizing an existing furnace could cost in between $3,000 and $7,000 or more. Typically, that expense will be split around 60/40, with labor accounting for majority of it.

However, remember that you will most likely be paying complete retail rather than receiving a commercial discount rate, so the whole cost of the project may not be cheaper than the specialist’s quote. You’ll likewise have to perform your own sizing, and you’ll be held responsible if there are any issues with the devices.

If you’re replacing an existing main air conditioning system, expect an additional price to eliminate and dispose of the old system and refrigerant. When constructing a furnace and air conditioning system, the cost of each part is frequently reduced, while the overall cost of the work is higher.

Central AC Installation in Atlanta, GA 30315

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Atlanta, GA 30315

Call 855-608-3406 Now!

Central Air Conditioner Installation in Atlanta, GA

Tel:855-608-3406

Main address: PO Box 675759 Atlanta, GA
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Atlanta, GA

Call 855-608-3406 Now!

Additional HVAC Services in Atlanta Ga 30315 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.