Central Air Conditioner Installation in Charlotte, NC 28280

For the fantastic majority of houses, central air installation is stuffed and too complex with danger to try without professional help. This is owing to the proficiency needed, the administrative wrangling of consents and licensing requirements, and the danger of voiding service warranties if the parts are installed wrongly.

What do Central Air Conditioners do?

A central air conditioner cools air in one area prior to dispersing it throughout the house using the furnace’s air handling capabilities. This sets it apart from window or wall air conditioning system or mini-split systems, which all chill relatively small locations and require lots of systems to cool the whole house.

Many single-family houses in the United States with main air utilize a split system. This suggests that the device is divided into 2 parts: an evaporator coil within your house and a compressor outside.

Central Air Conditioner Installation in Charlotte, NC 28280

Working With Professional Central Air Conditioner Installers in Charlotte, NC

When speaking to specialists, ask about their technique to the task. Likewise, pay attention to the questions they ask! An installer ought to ask clarifying concerns so that your preferences and decisions are represented in their estimate and the end outcome.

Planning for Central Air Installation in in Charlotte

Installing central air is a large endeavor that needs substantial preparation ahead of time. Request that your professional check their procedure and verify that they will deal with any needed authorizations or other important documents.

Discuss with your contractor just how much you value energy performance above preliminary expenditure. This is likewise an exceptional minute to talk about the position of the condenser system and the kind of thermostat you choose.

Sizing for your Central Air Conditioner

Your contractor will assist you in determining the appropriate size central air conditioning conditioner for your home. A system that is too little will run virtually continuously, whereas a system that is too big will chill the home too rapidly and shut off before finishing a full cycle.

The fast on/off in the latter circumstance is taxing on the system. It can cause the evaporator coil to freeze, and a frozen coil prevents air from flowing. As a result, a huge a/c unit may be less reliable at cooling than a smaller sized unit.

Your Air Conditioner installation will do a calculation called a “Manual-J” to identify best unit for your house. This will take into consideration all of the parameters we’ve pointed out and more, resulting in the most accurate size possible.

However, we understand that many homeowners like to have a general idea of what size they need ahead of time. Here’s a rough estimation of central air conditioner size: To get the Btu necessary, multiply the square video of your house’s conditioned location by 25, then divide by 12,000 to acquire the tonnage.

Keep in mind that this is simply a basic quote, and there are a number of aspects. If your home’s first flooring has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Charlotte, NC 28280

When you’ve gone over the basic strategy and talked about design possibilities, the contractor must provide you an price quote. As constantly, obtain composed estimates from different companies. The only exception would be if you’re installing air conditioning in a new home, because the home builder will probably handle it.

Do not be hesitant to seek clarifying details or demand expense breakdowns when working with a builder or independent HVAC contractor. Even if the specialist is unable to detail everything, they should be all set to communicate adequately to assist you feel more at ease with the treatment.

Central Air Conditioner Installation in Charlotte, NC 28280

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Rates differ based upon the local market and the task information, as with any considerable project. For labor and supplies, a common split system central air conditioning installation utilizing an existing furnace might cost between $3,000 and $7,000 or more. On average, that expense will be divided around 60/40, with labor accounting for most of it.

However, keep in mind that you will most likely be paying complete retail instead of receiving a business discount rate, so the whole expense of the task may not be less expensive than the professional’s price quote. You’ll also have to perform your own sizing, and you’ll be held accountable if there are any problems with the equipment.

eliminate and get rid of of the old system and refrigerant if you’re replacing an existing central air system. When constructing a heating system and air conditioning system, the expense of each element is frequently decreased, while the total cost of the work is higher.

Central AC Installation in Charlotte, NC 28280

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Charlotte, NC 28280

Call 855-608-3406 Now!

Central Air Conditioner Installation in Charlotte, NC

Tel:855-608-3406

Main address: PO Box 613130 Charlotte, NC
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Charlotte, NC

Call 855-608-3406 Now!

Additional HVAC Services in Charlotte Nc 28280 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.