Central Air Conditioner Installation in Elkton, KY 42220

For the fantastic majority of houses, central air installation is complex and filled with threat to attempt without professional help. This is owing to the proficiency needed, the bureaucratic wrangling of permissions and licensing requirements, and the danger of voiding guarantees if the components are installed wrongly.

What do Central Air Conditioners do?

A main air conditioner cools air in one area prior to distributing it throughout the residence utilizing the heater’s air handling capabilities. This sets it apart from window or wall air conditioners or mini-split systems, which all chill reasonably small areas and require many units to cool the entire house.

The majority of single-family homes in the United States with central air conditioning utilize a split system. This indicates that the device is divided into two parts: an evaporator coil within your house and a compressor outside.

Central Air Conditioner Installation in Elkton, KY 42220

Working With Professional Central Air Conditioner Installers in Elkton, KY

When speaking with specialists, inquire about their approach to the job. Pay attention to the concerns they ask! An installer needs to ask clarifying questions so that your preferences and choices are represented in their quote and the end result.

Planning for Central Air Installation in in Elkton

Setting up central air conditioning is a large undertaking that requires significant preparation ahead of time. Request that your professional check their treatment and confirm that they will manage any needed authorizations or other essential documents.

Go over with your professional how much you value energy efficiency above initial expenditure. This is likewise an outstanding minute to discuss the position of the condenser unit and the type of thermostat you select.

Sizing for your Central Air Conditioner

Your specialist will assist you in identifying the proper size central air conditioning conditioner for your home. A system that is too small will run virtually constantly, whereas a system that is too big will chill the home too quickly and shut off before finishing a complete cycle.

The quick on/off in the latter scenario is taxing on the system. It can cause the evaporator coil to freeze, and a frozen coil avoids air from flowing. As a result, a huge air conditioning system may be less reliable at cooling than a smaller unit.

Your Air Conditioner installation will do a estimation known as a “Manual-J” to recognize the very best unit for your home. This will take into consideration all of the parameters we’ve discussed and more, leading to the most precise size possible.

We understand that many homeowners like to have a general idea of what size they need ahead of time. Here’s a rough estimation of central air conditioner size: To get the Btu necessary, multiply the square footage of your home’s conditioned area by 25, then divide by 12,000 to acquire the tonnage.

a lot of those windows, you may require more cooling.

Getting an Estimate for a Central Air Conditioner in Elkton, KY 42220

contractor needs to use you an price quote as soon as you’ve reviewed the basic strategy and gone over design possibilities. As always, obtain composed quotes from numerous service providers. The only exception would be if you’re setting up a/c in a new house, since the home builder will more than likely manage it.

Don’t be reluctant to look for clarifying information or request expense breakdowns when working with a home builder or independent HVAC contractor. Even if the professional is unable to detail everything, they should be prepared to communicate sufficiently to help you feel more at ease with the procedure.

Central Air Conditioner Installation in Elkton, KY 42220

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Rates vary based upon the regional market and the job details, similar to any considerable job. For labor and materials, a typical split system central air conditioning installation using an existing heating system could cost in between $3,000 and $7,000 or more. On average, that cost will be split around 60/40, with labor accounting for majority of it.

However, keep in mind that you will most likely be paying complete retail rather than getting a commercial discount rate, so the entire cost of the task may not be less expensive than the specialist’s price quote. You’ll also need to perform your own sizing, and you’ll be held accountable if there are any issues with the equipment.

get rid of and remove of the old system and refrigerant if you’re changing an existing central air system. When building a heating system and cooling system, the cost of each component is regularly decreased, while the general cost of the work is higher.

Central AC Installation in Elkton, KY 42220

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Elkton, KY 42220

Call 855-608-3406 Now!

Central Air Conditioner Installation in Elkton, KY

Tel:855-608-3406

Main address: PO Box 663539 Elkton, KY
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Elkton, KY

Call 855-608-3406 Now!

Additional HVAC Services in Elkton Ky 42220 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.