Central Air Conditioner Installation in Houston, TX 77073

For the fantastic bulk of homes, central air conditioning installation is complex and filled with threat to try without skilled support. This is owing to the knowledge essential, the governmental wrangling of authorizations and licensing requirements, and the risk of voiding service warranties if the elements are installed wrongly.

What do Central Air Conditioners do?

A central air conditioning conditioner cools air in one area prior to distributing it throughout the home utilizing the heater’s air handling capabilities. This sets it apart from window or wall air conditioning unit or mini-split systems, which all chill fairly small locations and need numerous systems to cool the entire house.

Many single-family homes in the United States with central air use a split system. This suggests that the device is divided into two parts: an evaporator coil within a compressor and the house outside.

Central Air Conditioner Installation in Houston, TX 77073

Working With Professional Central Air Conditioner Installers in Houston, TX

When talking to specialists, inquire about their approach to the task. Pay attention to the concerns they ask! An installer needs to ask clarifying questions so that your decisions and preferences are represented in their price quote and the end result.

Planning for Central Air Installation in in Houston

Installing central air is a big undertaking that requires considerable preparation ahead of time. Demand that your professional inspect their procedure and confirm that they will manage any needed permits or other important documentation.

Go over with your contractor how much you worth energy performance above initial expense. This is likewise an exceptional minute to talk about the position of the condenser unit and the type of thermostat you choose.

Sizing for your Central Air Conditioner

Your specialist will assist you in determining the appropriate size main air conditioner for your house. A system that is too small will run practically continually, whereas a unit that is too large will chill the home too quickly and shut off before completing a full cycle.

The fast on/off in the latter situation is taxing on the system. It can cause the evaporator coil to freeze, and a frozen coil prevents air from streaming. As a result, a big air conditioner may be less efficient at cooling than a smaller sized system.

Your Air Conditioner installation will do a calculation called a “Manual-J” to determine the very best unit for your house. This will consider all of the specifications we’ve mentioned and more, leading to the most precise size possible.

We understand that many house owners like to have a basic notion of what size they need ahead of time. central air conditioning conditioner size: To get the Btu needed, increase the square video of your house’s conditioned area by 25, then divide by 12,000 to acquire the tonnage.

a number of those windows, you may need more cooling.

Getting an Estimate for a Central Air Conditioner in Houston, TX 77073

specialist must provide you an quote as soon as you’ve gone over the basic plan and gone over model possibilities. As constantly, obtain composed estimates from numerous companies. The only exception would be if you’re installing air conditioning in a brand-new house, given that the builder will most likely handle it.

When working with a home builder or independent HVAC specialist, don’t be hesitant to seek clarifying information or request expense breakdowns. Even if the contractor is unable to information whatever, they need to be ready to communicate sufficiently to assist you feel more at ease with the treatment.

Central Air Conditioner Installation in Houston, TX 77073

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices vary based on the regional market and the job details, as with any substantial job. For labor and products, a common split system central air installation utilizing an existing furnace might cost in between $3,000 and $7,000 or more. Usually, that cost will be split around 60/40, with labor accounting for most of it.

However, keep in mind that you will more than likely be paying complete retail instead of receiving a commercial discount, so the whole expense of the project may not be cheaper than the contractor’s estimate. You’ll also need to perform your own sizing, and you’ll be held accountable if there are any problems with the devices.

If you’re replacing an existing central air conditioning system, anticipate an extra cost to get rid of and get rid of of the old system and refrigerant. When developing a heating system and cooling system, the cost of each part is often reduced, while the overall expense of the work is higher.

Central AC Installation in Houston, TX 77073

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Houston, TX 77073

Call 855-608-3406 Now!

Central Air Conditioner Installation in Houston, TX

Tel:855-608-3406

Main address: PO Box 403831 Houston, TX
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Houston, TX

Call 855-608-3406 Now!

Additional HVAC Services in Houston Tx 77073 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.