Central Air Conditioner Installation in Jacksonville, FL 32246

For the fantastic majority of homes, central air installation is complex and laden with danger to try without expert help. This is owing to the expertise needed, the bureaucratic wrangling of authorizations and licensing requirements, and the risk of voiding warranties if the elements are set up mistakenly.

What do Central Air Conditioners do?

A main air conditioner cools air in one spot prior to dispersing it throughout the residence utilizing the heater’s air handling abilities. This sets it apart from window or wall ac system or mini-split systems, which all chill reasonably small areas and require numerous systems to cool the entire house.

A lot of single-family homes in the United States with central air use a split system. This indicates that the gadget is divided into two parts: an evaporator coil within a compressor and the home exterior.

Central Air Conditioner Installation in Jacksonville, FL 32246

Working With Professional Central Air Conditioner Installers in Jacksonville, FL

When speaking with contractors, ask about their method to the task. Likewise, take notice of the questions they ask! An installer must ask clarifying concerns so that your decisions and preferences are represented in their estimate and the end outcome.

Planning for Central Air Installation in in Jacksonville

Installing main air conditioning is a big endeavor that needs considerable preparation ahead of time. Request that your contractor check their treatment and validate that they will deal with any needed licenses or other crucial paperwork.

Go over with your professional just how much you worth energy effectiveness above initial expenditure. This is likewise an outstanding minute to talk about the position of the condenser system and the kind of thermostat you select.

Sizing for your Central Air Conditioner

Your contractor will assist you in figuring out the suitable size central air conditioning conditioner for your house. A unit that is too little will run almost continually, whereas a unit that is too big will chill the house too quickly and turn off prior to finishing a complete cycle.

The quick on/off in the latter scenario is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil avoids air from streaming. As a result, a big air conditioning unit might be less reliable at cooling than a smaller sized system.

Your Air Conditioner installation will do a estimation known as a “Manual-J” to determine the very best unit for your home. This will consider all of the specifications we’ve mentioned and more, leading to the most exact size possible.

However, we understand that numerous property owners like to have a basic notion of what size they need ahead of time. Here’s a rough estimate of main air conditioner size: To get the Btu necessary, multiply the square video of your home’s conditioned area by 25, then divide by 12,000 to obtain the tonnage.

Keep in mind that this is simply a standard quote, and there are several elements. If your home’s first floor has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Jacksonville, FL 32246

As soon as you’ve gone over the fundamental strategy and talked about model possibilities, the specialist ought to use you an estimate. As always, get written estimates from different suppliers. The only exception would be if you’re installing cooling in a new house, since the contractor will most likely handle it.

When working with a home builder or independent HVAC professional, do not be hesitant to look for clarifying information or demand cost breakdowns. Even if the contractor is unable to detail whatever, they ought to be ready to communicate adequately to assist you feel more at ease with the treatment.

Central Air Conditioner Installation in Jacksonville, FL 32246

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices differ based on the regional market and the task details, similar to any substantial project. For labor and materials, a common split system central air installation using an existing heating system might cost in between $3,000 and $7,000 or more. Usually, that expense will be divided around 60/40, with labor accounting for majority of it.

Bear in mind that you will most likely be paying full retail rather than receiving a commercial discount rate, so the whole expense of the job may not be more affordable than the professional’s quote. You’ll also have to perform your own sizing, and you’ll be held accountable if there are any problems with the devices.

If you’re replacing an existing central air conditioning system, anticipate an additional rate to get rid of and dispose of the old system and refrigerant. When building a furnace and air conditioning system, the expense of each element is regularly decreased, while the general cost of the work is higher.

Central AC Installation in Jacksonville, FL 32246

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Jacksonville, FL 32246

Call 855-608-3406 Now!

Central Air Conditioner Installation in Jacksonville, FL

Tel:855-608-3406

Main address: PO Box 714755 Jacksonville, FL
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Jacksonville, FL

Call 855-608-3406 Now!

Additional HVAC Services in Jacksonville Fl 32246 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.