Central Air Conditioner Installation in Jacksonville, NC 28546

For the great bulk of homes, central air conditioning installation is complicated and stuffed with threat to attempt without professional support. This is owing to the expertise essential, the governmental wrangling of authorizations and licensing requirements, and the threat of voiding warranties if the components are set up wrongly.

What do Central Air Conditioners do?

A central air conditioning conditioner cools air in one spot before distributing it throughout the house using the furnace’s air handling capabilities. This sets it apart from window or wall air conditioning system or mini-split systems, which all chill relatively small areas and require many units to cool the whole home.

Most single-family homes in the United States with central air conditioning utilize a split system. This implies that the device is divided into 2 parts: an evaporator coil within a compressor and the home outside.

Central Air Conditioner Installation in Jacksonville, NC 28546

Working With Professional Central Air Conditioner Installers in Jacksonville, NC

When speaking with specialists, inquire about their technique to the job. Pay attention to the questions they ask! An installer needs to ask clarifying concerns so that your preferences and choices are represented in their price quote and completion result.

Planning for Central Air Installation in in Jacksonville

Setting up central air conditioning is a big undertaking that requires substantial preparation ahead of time. Request that your specialist inspect their procedure and confirm that they will manage any required licenses or other important documents.

Talk about with your contractor how much you value energy performance above preliminary expenditure. This is likewise an outstanding moment to talk about the position of the condenser unit and the kind of thermostat you choose.

Sizing for your Central Air Conditioner

Your specialist will assist you in determining the appropriate size central air conditioning conditioner for your home. A system that is too small will run almost constantly, whereas a system that is too big will chill the house too quickly and shut down prior to finishing a full cycle.

The quick on/off in the latter circumstance is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil prevents air from flowing. As a outcome, a big air conditioning system might be less reliable at cooling than a smaller sized system.

Your Air Conditioner installation will do a computation known as a “Manual-J” to recognize the very best system for your house. This will take into account all of the criteria we’ve pointed out and more, resulting in the most exact size possible.

However, we understand that many house owners like to have a general idea of what size they require ahead of time. central air conditioner size: To get the Btu essential, multiply the square video of your home’s conditioned location by 25, then divide by 12,000 to obtain the tonnage.

If you have numerous of those windows, you may need more cooling.

Getting an Estimate for a Central Air Conditioner in Jacksonville, NC 28546

contractor ought to provide you an price quote once you’ve reviewed the standard strategy and talked about design possibilities. As always, acquire composed quotes from various providers. The only exception would be if you’re setting up air conditioning in a brand-new home, considering that the builder will most likely handle it.

When working with a builder or independent HVAC professional, do not be hesitant to look for clarifying details or demand expense breakdowns. Even if the contractor is unable to detail whatever, they need to be all set to interact adequately to assist you feel more at ease with the procedure.

Central Air Conditioner Installation in Jacksonville, NC 28546

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices differ based upon the local market and the task details, as with any significant job. For labor and materials, a typical split system central air installation using an existing heater could cost between $3,000 and $7,000 or more. Usually, that expense will be split around 60/40, with labor accounting for bulk of it.

Bear in mind that you will most likely be paying complete retail rather than receiving a commercial discount, so the whole cost of the task might not be less expensive than the professional’s price quote. You’ll likewise need to perform your own sizing, and you’ll be held liable if there are any issues with the devices.

If you’re replacing an existing central air conditioning system, anticipate an additional price to dispose and get rid of of the old system and refrigerant. When building a heater and cooling system, the cost of each element is frequently lowered, while the overall expense of the work is greater.

Central AC Installation in Jacksonville, NC 28546

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Jacksonville, NC 28546

Call 855-608-3406 Now!

Central Air Conditioner Installation in Jacksonville, NC

Tel:855-608-3406

Main address: PO Box 265947 Jacksonville, NC
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Jacksonville, NC

Call 855-608-3406 Now!

Additional HVAC Services in Jacksonville Nc 28546 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.