Central Air Conditioner Installation in Kansas City, MO 64109

For the great majority of homes, central air conditioning installation is complex and fraught with danger to try without professional assistance. This is owing to the competence necessary, the administrative wrangling of consents and licensing requirements, and the risk of voiding warranties if the parts are installed mistakenly.

What do Central Air Conditioners do?

A central air conditioner cools air in one area prior to distributing it throughout the residence using the furnace’s air handling capabilities. This sets it apart from window or wall air conditioners or mini-split systems, which all chill reasonably tiny locations and require many systems to cool the whole home.

Many single-family houses in the United States with central air conditioning use a split system. This indicates that the device is divided into 2 parts: an evaporator coil within your house and a compressor exterior.

Central Air Conditioner Installation in Kansas City, MO 64109

Working With Professional Central Air Conditioner Installers in Kansas City, MO

When consulting with contractors, ask about their method to the task. Likewise, take note of the questions they ask! An installer needs to ask clarifying questions so that your preferences and decisions are represented in their estimate and the end outcome.

Planning for Central Air Installation in in Kansas City

Installing main air conditioning is a large undertaking that requires considerable preparation ahead of time. Demand that your specialist check their procedure and confirm that they will deal with any required permits or other crucial documentation.

Discuss with your contractor just how much you worth energy efficiency above preliminary cost. This is also an outstanding minute to talk about the position of the condenser system and the type of thermostat you choose.

Sizing for your Central Air Conditioner

Your contractor will help you in identifying the proper size central air conditioning conditioner for your home. A unit that is too little will run almost continually, whereas a system that is too large will chill the home too quickly and shut down prior to finishing a complete cycle.

The fast on/off in the latter situation is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil prevents air from streaming. As a result, a big air conditioning system may be less effective at cooling than a smaller sized unit.

Your Air Conditioner installation will do a calculation understood as a “Manual-J” to recognize finest unit for your home. This will take into account all of the parameters we’ve pointed out and more, leading to the most exact size possible.

However, we understand that many house owners like to have a basic idea of what size they require ahead of time. Here’s a rough evaluation of main air conditioner size: To get the Btu necessary, multiply the square video of your house’s conditioned location by 25, then divide by 12,000 to get the tonnage.

much of those windows, you may need more cooling.

Getting an Estimate for a Central Air Conditioner in Kansas City, MO 64109

specialist must offer you an price quote as soon as you’ve discussed the standard plan and talked about design possibilities. As always, get composed quotes from various providers. The only exception would be if you’re setting up cooling in a brand-new home, considering that the builder will probably manage it.

Do not be hesitant to seek clarifying details or request cost breakdowns when working with a builder or independent HVAC contractor. Even if the professional is not able to information whatever, they should be all set to communicate adequately to help you feel more at ease with the procedure.

Central Air Conditioner Installation in Kansas City, MO 64109

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices vary based upon the regional market and the task information, just like any substantial project. For labor and products, a typical split system central air conditioning installation using an existing furnace could cost in between $3,000 and $7,000 or more. Usually, that cost will be divided around 60/40, with labor accounting for most of it.

However, remember that you will probably be paying complete retail instead of getting a commercial discount rate, so the entire expense of the project may not be cheaper than the specialist’s price quote. You’ll likewise have to perform your own sizing, and you’ll be held liable if there are any problems with the devices.

get rid of and get rid of of the old system and refrigerant if you’re replacing an existing central air system. When building a heater and cooling system, the cost of each element is regularly decreased, while the overall expense of the work is higher.

Central AC Installation in Kansas City, MO 64109

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Kansas City, MO 64109

Call 855-608-3406 Now!

Central Air Conditioner Installation in Kansas City, MO

Tel:855-608-3406

Main address: PO Box 524154 Kansas City, MO
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Kansas City, MO

Call 855-608-3406 Now!

Additional HVAC Services in Kansas City Mo 64109 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.