Central Air Conditioner Installation in Lancaster, MA 01523

For the terrific bulk of homes, central air installation is fraught and too complicated with danger to attempt without expert support. This is owing to the proficiency essential, the bureaucratic wrangling of authorizations and licensing requirements, and the risk of voiding service warranties if the elements are set up incorrectly.

What do Central Air Conditioners do?

A central air conditioning conditioner cools air in one area before dispersing it throughout the house utilizing the furnace’s air handling abilities. This sets it apart from window or wall air conditioners or mini-split systems, which all chill fairly small locations and require many units to cool the whole home.

Many single-family homes in the United States with central air conditioning use a split system. This suggests that the device is divided into two parts: an evaporator coil within your house and a compressor outside.

Central Air Conditioner Installation in Lancaster, MA 01523

Working With Professional Central Air Conditioner Installers in Lancaster, MA

When speaking with contractors, ask about their approach to the task. Also, focus on the concerns they ask! An installer should ask clarifying concerns so that your preferences and choices are represented in their quote and completion outcome.

Planning for Central Air Installation in in Lancaster

Installing main air conditioning is a large endeavor that requires substantial preparation ahead of time. Demand that your professional check their treatment and validate that they will deal with any required licenses or other important paperwork.

Go over with your specialist how much you worth energy effectiveness above initial expenditure. This is likewise an excellent moment to discuss the position of the condenser system and the kind of thermostat you pick.

Sizing for your Central Air Conditioner

Your contractor will assist you in identifying the appropriate size central air conditioner for your home. A unit that is too little will run practically constantly, whereas a unit that is too large will chill the home too quickly and shut off before completing a full cycle.

The quick on/off in the latter circumstance is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil avoids air from streaming. As a outcome, a big air conditioning system may be less effective at cooling than a smaller system.

Your Air Conditioner installation will do a estimation known as a “Manual-J” to determine the very best unit for your house. This will consider all of the specifications we’ve mentioned and more, leading to the most accurate size possible.

We comprehend that many homeowners like to have a general notion of what size they need ahead of time. central air conditioner size: To get the Btu necessary, multiply the square footage of your home’s conditioned area by 25, then divide by 12,000 to get the tonnage.

much of those windows, you might need more cooling.

Getting an Estimate for a Central Air Conditioner in Lancaster, MA 01523

When you’ve gone over the standard strategy and discussed model possibilities, the professional ought to use you an quote. As constantly, get written price quotes from various companies. The only exception would be if you’re setting up a/c in a new home, since the builder will more than likely handle it.

Don’t be hesitant to seek clarifying information or demand cost breakdowns when dealing with a builder or independent HVAC contractor. Even if the professional is unable to detail everything, they should be prepared to communicate adequately to assist you feel more at ease with the treatment.

Central Air Conditioner Installation in Lancaster, MA 01523

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices differ based upon the local market and the job information, just like any considerable task. For labor and materials, a normal split system central air conditioning installation utilizing an existing heater might cost between $3,000 and $7,000 or more. Typically, that expense will be split around 60/40, with labor accounting for majority of it.

Bear in mind that you will most likely be paying complete retail rather than receiving a business discount rate, so the whole cost of the task might not be more affordable than the specialist’s quote. You’ll also need to perform your own sizing, and you’ll be held liable if there are any issues with the devices.

get rid of and get rid of of the old system and refrigerant if you’re changing an existing central air system. When constructing a heater and cooling system, the cost of each component is often reduced, while the overall expense of the work is greater.

Central AC Installation in Lancaster, MA 01523

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Read More

Call 855-608-3406 Now!

Additional HVAC Services in Lancaster Ma 01523 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.