Central Air Conditioner Installation in Lexington, KY 40504

For the fantastic majority of homes, central air installation is laden and too complex with risk to try without skilled help. This is owing to the knowledge necessary, the bureaucratic wrangling of approvals and licensing requirements, and the risk of voiding guarantees if the parts are installed incorrectly.

What do Central Air Conditioners do?

A central air conditioning conditioner cools air in one spot prior to distributing it throughout the house using the heating system’s air handling abilities. This sets it apart from window or wall a/c unit or mini-split systems, which all chill reasonably small areas and require lots of systems to cool the whole home.

A lot of single-family houses in the United States with main air utilize a split system. This suggests that the gadget is divided into 2 parts: an evaporator coil within house and a compressor exterior.

Working With Professional Central Air Conditioner Installers in Lexington, KY

When talking to contractors, inquire about their approach to the task. Also, take notice of the questions they ask! An installer ought to ask clarifying concerns so that your choices and decisions are represented in their quote and completion result.

Planning for Central Air Installation in in Lexington

Installing central air is a large endeavor that needs considerable preparation ahead of time. Demand that your professional check their treatment and verify that they will deal with any required authorizations or other crucial documents.

Go over with your contractor how much you worth energy effectiveness above initial cost. This is also an exceptional moment to discuss the position of the condenser system and the type of thermostat you choose.

Sizing for your Central Air Conditioner

Your contractor will assist you in determining the appropriate size central air conditioning conditioner for your home. A unit that is too small will run virtually continuously, whereas a system that is too big will chill the house too quickly and shut down prior to completing a complete cycle.

The fast on/off in the latter circumstance is taxing on the system. It can cause the evaporator coil to freeze, and a frozen coil avoids air from flowing. As a outcome, a huge a/c might be less efficient at cooling than a smaller system.

Your Air Conditioner installation will do a estimation called a “Manual-J” to recognize finest unit for your home. This will take into account all of the parameters we’ve pointed out and more, resulting in the most precise size possible.

We understand that many house owners like to have a basic notion of what size they require ahead of time. central air conditioning conditioner size: To get the Btu essential, increase the square footage of your house’s conditioned area by 25, then divide by 12,000 to acquire the tonnage.

Keep in mind that this is simply a standard quote, and there are several elements. If your home’s very first floor has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Lexington, KY 40504

When you’ve gone over the basic strategy and talked about model possibilities, the contractor ought to use you an estimate. As always, obtain composed quotes from various service providers. The only exception would be if you’re installing a/c in a brand-new home, since the home builder will most likely handle it.

Don’t be hesitant to look for clarifying information or demand expenditure breakdowns when working with a home builder or independent HVAC professional. Even if the specialist is unable to detail everything, they ought to be ready to communicate adequately to assist you feel more at ease with the procedure.

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

• Duct work installation or modification
  • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
  • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
  • Duct work should be done before drywall is put in new construction.

• Interior unit
  • The evaporator coil is installed within the furnace plenum.
    • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
    • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”

• Exterior unit
  • Several considerations influence the positioning of the outside unit, including:
    • The distance between the inside unit and the electrical service panel;
    • The levelness of the ground;
    • The proximity of the loud external unit to windows or doors;
    • Distances needed by code from gas or water meters (refer to your local building department for specifics).

• Connect the line set
  • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
  • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
    • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
    • To avoid water infiltration, the penetration to the external should be sealed.

• Connect the Electrical Supply
  • An outside cutoff will be required for the condenser unit.
  • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
  • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
  • • If the project was planned properly, any work on the panel should already be included in the project estimate.
  • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.

• Condensate Drain Line
  • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
  • Units located in a basement typically run to a floor drain.
  • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.

• Thermostat
  • When installing central air conditioning in a new home, you must select a thermostat.
  • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
  • This is one phase in the process that is ideal for a little do-it-yourself effort.
    • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Costs differ based on the regional market and the job information, just like any substantial task. For labor and products, a typical split system central air conditioning installation using an existing heating system could cost between $3,000 and $7,000 or more. Typically, that expense will be split around 60/40, with labor accounting for most of it.

Nevertheless, remember that you will more than likely be paying complete retail rather than receiving a commercial discount rate, so the entire cost of the task may not be cheaper than the contractor’s estimate. You’ll also need to perform your own sizing, and you’ll be held accountable if there are any issues with the equipment.

If you’re replacing an existing central air conditioning system, expect an additional price to get rid of and get rid of of the old system and refrigerant. When developing a furnace and air conditioning system, the expense of each component is regularly decreased, while the overall cost of the work is higher.

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Call 855-608-3406 Now!

Call 855-608-3406 Now!

Additional HVAC Services in Lexington Ky 40504 Include:

• Boiler Repair in Lexington Ky 40504
• HVAC Repair in Lexington Ky 40504
• 24 Hour AC Repair in Lexington Ky 40504

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

• Boilers and Radiators - New Install
• Boilers and Radiators - Repair
• Commercial Heat - New Install
• Commercial Heat - Repair
• Electric Heat - New Install
• Electric Heat - Repair
• Furnaces - New Install
• Furnaces - Repair
• Gas Heat - New Install
• Gas Heat - Repair
• Geothermal Systems
• Heat Pumps - New Install
• Heat Pumps - Repair
• Heating - New Install
• Heating - Repair
• Oil Heat - New Install
• Oil Heat - Repair
• Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.

• Air Ducts - Repair & Replace
• Central Air - Cleaning & Maintenance
• Central AC Installation in Lexington Ky 40504
• Central Air - Repair
• Commercial Cooling
• Ductless Air Conditioning
• Thermostats