Central Air Conditioner Installation in Lexington, NC 27295

For the fantastic bulk of homes, central air conditioning installation is complicated and fraught with risk to attempt without expert assistance. This is owing to the expertise necessary, the administrative wrangling of authorizations and licensing requirements, and the danger of voiding warranties if the parts are set up incorrectly.

What do Central Air Conditioners do?

A central air conditioner cools air in one area before distributing it throughout the home utilizing the furnace’s air handling capabilities. This sets it apart from window or wall ac system or mini-split systems, which all chill relatively tiny areas and need many systems to cool the whole house.

Many single-family houses in the United States with central air use a split system. This indicates that the device is divided into 2 parts: an evaporator coil within a compressor and the house outside.

Central Air Conditioner Installation in Lexington, NC 27295

Working With Professional Central Air Conditioner Installers in Lexington, NC

When consulting with professionals, ask about their method to the job. Pay attention to the questions they ask! An installer needs to ask clarifying concerns so that your choices and choices are represented in their quote and completion result.

Planning for Central Air Installation in in Lexington

Installing central air conditioning is a big undertaking that requires substantial preparation ahead of time. Demand that your professional check their treatment and verify that they will deal with any required permits or other important documentation.

Go over with your contractor how much you value energy efficiency above preliminary cost. This is also an exceptional minute to go over the position of the condenser system and the kind of thermostat you select.

Sizing for your Central Air Conditioner

Your specialist will help you in figuring out the proper size central air conditioning conditioner for your home. A system that is too little will run virtually constantly, whereas a system that is too large will chill the house too quickly and shut down before completing a complete cycle.

The quick on/off in the latter situation is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil avoids air from flowing. As a outcome, a huge ac system may be less efficient at cooling than a smaller sized system.

Your Air Conditioner installation will do a calculation understood as a “Manual-J” to recognize finest system for your house. This will consider all of the criteria we’ve discussed and more, resulting in the most exact size possible.

We understand that lots of house owners like to have a basic idea of what size they require ahead of time. Here’s a rough estimate of main air conditioner size: To get the Btu needed, increase the square video of your house’s conditioned area by 25, then divide by 12,000 to obtain the tonnage.

Keep in mind that this is merely a fundamental quote, and there are a number of factors. If your house’s first floor has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Lexington, NC 27295

When you’ve gone over the fundamental strategy and discussed design possibilities, the contractor should use you an quote. As constantly, acquire composed quotes from numerous service providers. The only exception would be if you’re installing air conditioning in a new house, considering that the builder will more than likely handle it.

Don’t be hesitant to seek clarifying information or request expense breakdowns when working with a contractor or independent HVAC specialist. Even if the contractor is unable to information whatever, they should be prepared to interact adequately to assist you feel more at ease with the procedure.

Central Air Conditioner Installation in Lexington, NC 27295

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Costs vary based on the local market and the task details, just like any considerable project. For labor and materials, a common split system central air conditioning installation utilizing an existing furnace could cost between $3,000 and $7,000 or more. On average, that cost will be divided around 60/40, with labor accounting for most of it.

Bear in mind that you will most likely be paying full retail rather than receiving a business discount rate, so the whole cost of the job may not be more affordable than the contractor’s price quote. You’ll likewise have to perform your own sizing, and you’ll be held liable if there are any issues with the devices.

get rid of and dispose of the old system and refrigerant if you’re changing an existing central air system. When constructing a heater and air conditioning system, the cost of each element is often lowered, while the overall expense of the work is greater.

Central AC Installation in Lexington, NC 27295

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Lexington, NC 27295

Call 855-608-3406 Now!

Central Air Conditioner Installation in Lexington, NC

Tel:855-608-3406

Main address: PO Box 185941 Lexington, NC
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Lexington, NC

Call 855-608-3406 Now!

Additional HVAC Services in Lexington Nc 27295 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.