Central Air Conditioner Installation in Oklahoma City, OK 73111

For the fantastic majority of homes, central air conditioning installation is complicated and fraught with threat to attempt without expert help. This is owing to the know-how essential, the governmental wrangling of authorizations and licensing requirements, and the threat of voiding warranties if the parts are set up mistakenly.

What do Central Air Conditioners do?

A central air conditioner cools air in one spot before dispersing it throughout the house utilizing the furnace’s air handling abilities. This sets it apart from window or wall air conditioners or mini-split systems, which all chill fairly tiny locations and require lots of units to cool the whole home.

A lot of single-family homes in the United States with central air conditioning use a split system. This indicates that the gadget is divided into 2 parts: an evaporator coil within house and a compressor exterior.

Central Air Conditioner Installation in Oklahoma City, OK 73111

Working With Professional Central Air Conditioner Installers in Oklahoma City, OK

When talking with professionals, ask about their approach to the job. Likewise, take notice of the concerns they ask! An installer ought to ask clarifying concerns so that your choices and preferences are represented in their estimate and completion outcome.

Planning for Central Air Installation in in Oklahoma City

Setting up central air conditioning is a big undertaking that needs significant preparation ahead of time. Demand that your professional check their procedure and confirm that they will handle any needed licenses or other crucial documents.

Go over with your contractor just how much you value energy efficiency above preliminary cost. This is likewise an excellent minute to go over the position of the condenser system and the type of thermostat you choose.

Sizing for your Central Air Conditioner

Your professional will help you in identifying the appropriate size central air conditioning conditioner for your home. A unit that is too small will run almost constantly, whereas a unit that is too big will chill the home too quickly and turn off before finishing a full cycle.

The quick on/off in the latter situation is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil prevents air from streaming. As a outcome, a big air conditioning system might be less effective at cooling than a smaller sized system.

Your Air Conditioner installation will do a computation referred to as a “Manual-J” to recognize best system for your home. This will take into consideration all of the parameters we’ve pointed out and more, resulting in the most accurate size possible.

We understand that numerous house owners like to have a general concept of what size they require ahead of time. Here’s a rough evaluation of central air conditioner size: To get the Btu necessary, increase the square footage of your house’s conditioned area by 25, then divide by 12,000 to get the tonnage.

Keep in mind that this is merely a standard price quote, and there are a number of aspects. If your house’s first floor has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Oklahoma City, OK 73111

Once you’ve gone over the standard strategy and gone over model possibilities, the contractor needs to offer you an quote. As constantly, get composed estimates from various companies. The only exception would be if you’re setting up air conditioning in a new house, considering that the home builder will probably handle it.

When working with a contractor or independent HVAC contractor, do not be hesitant to seek clarifying information or request expenditure breakdowns. Even if the contractor is unable to information whatever, they should be prepared to interact sufficiently to assist you feel more at ease with the treatment.

Central Air Conditioner Installation in Oklahoma City, OK 73111

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices differ based upon the local market and the task details, similar to any substantial task. For labor and products, a normal split system main air installation using an existing heater might cost between $3,000 and $7,000 or more. On average, that cost will be split around 60/40, with labor accounting for bulk of it.

Bear in mind that you will most likely be paying full retail rather than getting a business discount, so the entire expense of the task may not be less expensive than the professional’s estimate. You’ll also have to perform your own sizing, and you’ll be held liable if there are any problems with the equipment.

dispose and eliminate of the old system and refrigerant if you’re replacing an existing central air system. When building a heating system and air conditioning system, the cost of each part is often lowered, while the total expense of the work is greater.

Central AC Installation in Oklahoma City, OK 73111

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Oklahoma City, OK 73111

Call 855-608-3406 Now!

Central Air Conditioner Installation in Oklahoma City, OK

Tel:855-608-3406

Main address: PO Box 365437 Oklahoma City, OK
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Oklahoma City, OK

Call 855-608-3406 Now!

Additional HVAC Services in Oklahoma City Ok 73111 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.