Central Air Conditioner Installation in Oklahoma City, OK 73145

For the fantastic majority of homes, central air installation is complicated and filled with danger to attempt without professional help. This is owing to the know-how necessary, the governmental wrangling of approvals and licensing requirements, and the threat of voiding guarantees if the parts are set up wrongly.

What do Central Air Conditioners do?

A central air conditioning conditioner cools air in one area prior to dispersing it throughout the home using the heater’s air handling capabilities. This sets it apart from window or wall ac system or mini-split systems, which all chill relatively small locations and require many systems to cool the whole home.

The majority of single-family houses in the United States with central air conditioning use a split system. This implies that the device is divided into 2 parts: an evaporator coil within home and a compressor exterior.

Central Air Conditioner Installation in Oklahoma City, OK 73145

Working With Professional Central Air Conditioner Installers in Oklahoma City, OK

When speaking with professionals, ask about their approach to the task. Likewise, take notice of the concerns they ask! An installer must ask clarifying questions so that your preferences and choices are represented in their estimate and completion outcome.

Planning for Central Air Installation in in Oklahoma City

Setting up central air conditioning is a big undertaking that requires substantial preparation ahead of time. Request that your specialist check their treatment and validate that they will handle any needed licenses or other important documentation.

Go over with your contractor just how much you worth energy effectiveness above initial expenditure. This is also an excellent moment to talk about the position of the condenser system and the type of thermostat you pick.

Sizing for your Central Air Conditioner

Your professional will help you in figuring out the appropriate size central air conditioner for your home. A unit that is too little will run virtually continually, whereas a unit that is too large will chill the house too rapidly and shut down prior to completing a complete cycle.

The fast on/off in the latter situation is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil avoids air from flowing. As a result, a huge air conditioner may be less effective at cooling than a smaller sized unit.

Your Air Conditioner installation will do a calculation referred to as a “Manual-J” to determine the very best unit for your home. This will take into account all of the specifications we’ve mentioned and more, resulting in the most exact size possible.

We comprehend that numerous property owners like to have a basic notion of what size they require ahead of time. central air conditioner size: To get the Btu required, multiply the square video footage of your house’s conditioned area by 25, then divide by 12,000 to obtain the tonnage.

If you have numerous of those windows, you may require more cooling.

Getting an Estimate for a Central Air Conditioner in Oklahoma City, OK 73145

professional ought to offer you an quote as soon as you’ve reviewed the standard strategy and talked about design possibilities. As always, get written estimates from numerous service providers. The only exception would be if you’re setting up cooling in a new home, given that the contractor will more than likely manage it.

Do not be reluctant to seek clarifying details or request expense breakdowns when working with a builder or independent HVAC professional. Even if the contractor is unable to information whatever, they should be prepared to communicate adequately to assist you feel more at ease with the procedure.

Central Air Conditioner Installation in Oklahoma City, OK 73145

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices differ based upon the regional market and the task information, similar to any significant project. For labor and materials, a typical split system main air installation using an existing furnace might cost between $3,000 and $7,000 or more. Typically, that expense will be split around 60/40, with labor accounting for most of it.

However, keep in mind that you will most likely be paying complete retail instead of getting a commercial discount, so the whole expense of the project might not be less expensive than the professional’s price quote. You’ll also need to perform your own sizing, and you’ll be held responsible if there are any issues with the equipment.

If you’re changing an existing main air conditioning system, expect an extra cost to get rid of and dispose of the old system and refrigerant. When constructing a heater and air conditioning system, the expense of each component is frequently reduced, while the total expense of the work is greater.

Central AC Installation in Oklahoma City, OK 73145

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Oklahoma City, OK 73145

Call 855-608-3406 Now!

Central Air Conditioner Installation in Oklahoma City, OK

Tel:855-608-3406

Main address: PO Box 164140 Oklahoma City, OK
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Oklahoma City, OK

Call 855-608-3406 Now!

Additional HVAC Services in Oklahoma City Ok 73145 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.