Central Air Conditioner Installation in Oxon Hill, MD 20745

For the fantastic majority of houses, central air installation is laden and too complex with threat to try without professional support. This is owing to the expertise needed, the administrative wrangling of permissions and licensing requirements, and the danger of voiding guarantees if the elements are set up wrongly.

What do Central Air Conditioners do?

A main air conditioner cools air in one spot before distributing it throughout the house utilizing the furnace’s air handling capabilities. This sets it apart from window or wall air conditioning system or mini-split systems, which all chill reasonably small areas and require lots of units to cool the entire house.

The majority of single-family houses in the United States with central air conditioning use a split system. This implies that the device is divided into 2 parts: an evaporator coil within your house and a compressor outside.

Central Air Conditioner Installation in Oxon Hill, MD 20745

Working With Professional Central Air Conditioner Installers in Oxon Hill, MD

When consulting with contractors, inquire about their approach to the task. Pay attention to the concerns they ask! An installer needs to ask clarifying concerns so that your preferences and choices are represented in their price quote and the end result.

Planning for Central Air Installation in in Oxon Hill

Setting up main air conditioning is a large endeavor that requires considerable preparation ahead of time. Request that your professional check their procedure and confirm that they will handle any needed permits or other essential documents.

Talk about with your professional how much you value energy efficiency above preliminary expenditure. This is likewise an excellent minute to discuss the position of the condenser system and the type of thermostat you choose.

Sizing for your Central Air Conditioner

Your professional will assist you in determining the suitable size main air conditioner for your home. A system that is too little will run almost continually, whereas a system that is too large will chill the house too rapidly and shut off prior to completing a complete cycle.

The fast on/off in the latter situation is taxing on the system. It can cause the evaporator coil to freeze, and a frozen coil prevents air from flowing. As a outcome, a huge air conditioner may be less effective at cooling than a smaller sized unit.

Your Air Conditioner installation will do a computation called a “Manual-J” to identify the very best unit for your home. This will take into consideration all of the parameters we’ve discussed and more, leading to the most accurate size possible.

We comprehend that lots of house owners like to have a basic notion of what size they need ahead of time. Here’s a rough estimation of central air conditioner size: To get the Btu essential, increase the square footage of your house’s conditioned location by 25, then divide by 12,000 to get the tonnage.

Keep in mind that this is merely a fundamental estimate, and there are numerous elements. If your house’s first floor has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Oxon Hill, MD 20745

Once you’ve gone over the fundamental strategy and talked about model possibilities, the contractor needs to use you an price quote. As constantly, get written price quotes from different providers. The only exception would be if you’re setting up a/c in a new house, considering that the contractor will more than likely handle it.

When working with a home builder or independent HVAC contractor, don’t be hesitant to seek clarifying details or demand expenditure breakdowns. Even if the specialist is not able to information everything, they need to be all set to communicate sufficiently to help you feel more at ease with the procedure.

Central Air Conditioner Installation in Oxon Hill, MD 20745

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Costs vary based upon the local market and the task information, as with any significant job. For labor and supplies, a normal split system central air conditioning installation using an existing furnace could cost in between $3,000 and $7,000 or more. Usually, that expense will be divided around 60/40, with labor accounting for majority of it.

Bear in mind that you will most likely be paying complete retail rather than getting a industrial discount, so the whole cost of the job might not be less expensive than the contractor’s quote. You’ll likewise have to perform your own sizing, and you’ll be held responsible if there are any issues with the devices.

If you’re replacing an existing central air conditioning system, expect an extra price to get rid of and eliminate of the old system and refrigerant. When constructing a heater and a/c system, the expense of each element is frequently reduced, while the general cost of the work is greater.

Central AC Installation in Oxon Hill, MD 20745

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Oxon Hill, MD 20745

Call 855-608-3406 Now!

Central Air Conditioner Installation in Oxon Hill, MD

Tel:855-608-3406

Main address: PO Box 934157 Oxon Hill, MD
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Oxon Hill, MD

Call 855-608-3406 Now!

Additional HVAC Services in Oxon Hill Md 20745 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.