Central Air Conditioner Installation in San Antonio, TX 78210

For the fantastic bulk of homes, central air conditioning installation is complex and stuffed with risk to try without professional support. This is owing to the expertise needed, the governmental wrangling of authorizations and licensing requirements, and the danger of voiding warranties if the components are installed wrongly.

What do Central Air Conditioners do?

A main air conditioner cools air in one spot before distributing it throughout the house utilizing the heating system’s air handling capabilities. This sets it apart from window or wall ac system or mini-split systems, which all chill fairly small locations and need numerous systems to cool the whole home.

Many single-family houses in the United States with central air conditioning utilize a split system. This implies that the gadget is divided into 2 parts: an evaporator coil within your house and a compressor outside.

Central Air Conditioner Installation in San Antonio, TX 78210

Working With Professional Central Air Conditioner Installers in San Antonio, TX

When talking with professionals, inquire about their approach to the job. Pay attention to the questions they ask! An installer must ask clarifying questions so that your decisions and preferences are represented in their quote and the end outcome.

Planning for Central Air Installation in in San Antonio

Installing central air is a big endeavor that needs significant preparation ahead of time. Request that your professional examine their procedure and confirm that they will manage any required permits or other crucial paperwork.

Talk about with your contractor how much you value energy performance above preliminary expenditure. This is also an excellent minute to go over the position of the condenser system and the kind of thermostat you pick.

Sizing for your Central Air Conditioner

Your professional will assist you in determining the proper size central air conditioning conditioner for your home. A system that is too small will run almost continually, whereas a unit that is too large will chill the home too quickly and shut down prior to finishing a complete cycle.

The quick on/off in the latter situation is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil prevents air from streaming. As a outcome, a big air conditioning system might be less efficient at cooling than a smaller sized system.

Your Air Conditioner installation will do a estimation called a “Manual-J” to determine best system for your house. This will take into account all of the parameters we’ve discussed and more, leading to the most accurate size possible.

Nevertheless, we comprehend that many homeowners like to have a general idea of what size they need ahead of time. Here’s a rough evaluation of central air conditioner size: To get the Btu required, multiply the square video footage of your house’s conditioned area by 25, then divide by 12,000 to obtain the tonnage.

Keep in mind that this is simply a fundamental quote, and there are several factors. If your house’s first floor has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in San Antonio, TX 78210

specialist ought to use you an quote once you’ve reviewed the basic plan and discussed model possibilities. As constantly, obtain composed price quotes from different companies. The only exception would be if you’re installing a/c in a new home, since the home builder will most likely handle it.

When working with a contractor or independent HVAC contractor, do not be hesitant to look for clarifying information or request expense breakdowns. Even if the contractor is unable to information everything, they need to be prepared to interact sufficiently to assist you feel more at ease with the treatment.

Central Air Conditioner Installation in San Antonio, TX 78210

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Costs vary based upon the local market and the job details, as with any considerable task. For labor and products, a common split system main air installation utilizing an existing heater could cost in between $3,000 and $7,000 or more. On average, that expense will be divided around 60/40, with labor accounting for most of it.

Bear in mind that you will most likely be paying complete retail rather than receiving a industrial discount rate, so the entire cost of the task might not be less expensive than the contractor’s price quote. You’ll likewise have to perform your own sizing, and you’ll be held liable if there are any problems with the devices.

get rid of and get rid of of the old system and refrigerant if you’re changing an existing central air system. When developing a heater and a/c system, the cost of each element is often lowered, while the general expense of the work is higher.

Central AC Installation in San Antonio, TX 78210

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in San Antonio, TX 78210

Call 855-608-3406 Now!

Central Air Conditioner Installation in San Antonio, TX

Tel:855-608-3406

Main address: PO Box 833350 San Antonio, TX
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in San Antonio, TX

Call 855-608-3406 Now!

Additional HVAC Services in San Antonio Tx 78210 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.