Central Air Conditioner Installation in San Francisco, CA 94132

For the great bulk of homes, central air installation is complex and laden with threat to try without professional assistance. This is owing to the know-how necessary, the administrative wrangling of authorizations and licensing requirements, and the danger of voiding service warranties if the components are installed incorrectly.

What do Central Air Conditioners do?

A central air conditioning conditioner cools air in one spot before distributing it throughout the home utilizing the furnace’s air handling abilities. This sets it apart from window or wall air conditioners or mini-split systems, which all chill reasonably small areas and need many systems to cool the entire home.

Most single-family homes in the United States with central air conditioning utilize a split system. This indicates that the gadget is divided into two parts: an evaporator coil within your home and a compressor outside.

Central Air Conditioner Installation in San Francisco, CA 94132

Working With Professional Central Air Conditioner Installers in San Francisco, CA

When talking with professionals, inquire about their approach to the job. Likewise, pay attention to the concerns they ask! An installer must ask clarifying concerns so that your choices and choices are represented in their price quote and the end result.

Planning for Central Air Installation in in San Francisco

Setting up central air conditioning is a large undertaking that needs significant preparation ahead of time. Demand that your professional check their procedure and verify that they will manage any needed permits or other important paperwork.

Discuss with your contractor just how much you worth energy performance above initial expense. This is also an exceptional moment to go over the position of the condenser system and the type of thermostat you choose.

Sizing for your Central Air Conditioner

Your contractor will assist you in identifying the proper size main air conditioner for your home. A system that is too small will run virtually continually, whereas a system that is too big will chill the home too rapidly and turn off before finishing a complete cycle.

The quick on/off in the latter circumstance is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil avoids air from streaming. As a outcome, a big air conditioner might be less efficient at cooling than a smaller sized system.

Your Air Conditioner installation will do a estimation referred to as a “Manual-J” to determine finest system for your home. This will take into consideration all of the specifications we’ve mentioned and more, leading to the most exact size possible.

We comprehend that many house owners like to have a general idea of what size they need ahead of time. main air conditioner size: To get the Btu required, multiply the square footage of your house’s conditioned location by 25, then divide by 12,000 to acquire the tonnage.

If you have many of those windows, you might need more cooling.

Getting an Estimate for a Central Air Conditioner in San Francisco, CA 94132

When you’ve gone over the fundamental strategy and discussed model possibilities, the specialist ought to use you an quote. As constantly, obtain composed estimates from different companies. The only exception would be if you’re setting up a/c in a new home, given that the contractor will probably handle it.

Don’t be hesitant to seek clarifying information or demand expenditure breakdowns when dealing with a builder or independent HVAC specialist. Even if the specialist is unable to detail whatever, they should be prepared to interact sufficiently to assist you feel more at ease with the treatment.

Central Air Conditioner Installation in San Francisco, CA 94132

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices vary based upon the regional market and the task information, as with any significant project. For labor and supplies, a typical split system central air conditioning installation utilizing an existing furnace could cost between $3,000 and $7,000 or more. Typically, that expense will be divided around 60/40, with labor accounting for most of it.

Nevertheless, remember that you will most likely be paying complete retail instead of getting a commercial discount rate, so the whole expense of the task may not be more affordable than the professional’s quote. You’ll also have to perform your own sizing, and you’ll be held responsible if there are any problems with the devices.

If you’re changing an existing central air conditioning system, anticipate an additional cost to dispose and get rid of of the old system and refrigerant. When building a heater and air conditioning system, the cost of each element is frequently reduced, while the general expense of the work is greater.

Central AC Installation in San Francisco, CA 94132

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in San Francisco, CA 94132

Call 855-608-3406 Now!

Central Air Conditioner Installation in San Francisco, CA

Tel:855-608-3406

Main address: PO Box 643535 San Francisco, CA
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in San Francisco, CA

Call 855-608-3406 Now!

Additional HVAC Services in San Francisco Ca 94132 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.