Central Air Conditioner Installation in San Jose, CA 95110

For the fantastic majority of homes, central air installation is complicated and laden with risk to try without professional assistance. This is owing to the competence required, the bureaucratic wrangling of consents and licensing requirements, and the risk of voiding service warranties if the parts are set up wrongly.

What do Central Air Conditioners do?

A main air conditioner cools air in one area prior to distributing it throughout the residence utilizing the furnace’s air handling abilities. This sets it apart from window or wall air conditioners or mini-split systems, which all chill relatively tiny areas and need lots of systems to cool the entire home.

Most single-family homes in the United States with central air conditioning utilize a split system. This implies that the device is divided into two parts: an evaporator coil within your house and a compressor outside.

Central Air Conditioner Installation in San Jose, CA 95110

Working With Professional Central Air Conditioner Installers in San Jose, CA

When speaking with specialists, ask about their approach to the task. Pay attention to the questions they ask! An installer must ask clarifying concerns so that your decisions and choices are represented in their price quote and completion result.

Planning for Central Air Installation in in San Jose

Installing central air is a large undertaking that needs considerable preparation ahead of time. Request that your professional inspect their treatment and confirm that they will deal with any required authorizations or other crucial documentation.

Discuss with your contractor how much you worth energy performance above preliminary cost. This is likewise an excellent moment to go over the position of the condenser unit and the type of thermostat you select.

Sizing for your Central Air Conditioner

Your specialist will help you in figuring out the proper size central air conditioning conditioner for your house. A unit that is too small will run almost continuously, whereas a unit that is too large will chill the house too rapidly and shut off prior to completing a complete cycle.

The fast on/off in the latter scenario is taxing on the system. It can cause the evaporator coil to freeze, and a frozen coil prevents air from flowing. As a result, a big a/c may be less efficient at cooling than a smaller system.

Your Air Conditioner installation will do a estimation referred to as a “Manual-J” to determine the very best unit for your house. This will take into account all of the parameters we’ve mentioned and more, resulting in the most exact size possible.

However, we comprehend that lots of house owners like to have a general concept of what size they need ahead of time. Here’s a rough evaluation of central air conditioner size: To get the Btu needed, increase the square video footage of your house’s conditioned area by 25, then divide by 12,000 to obtain the tonnage.

Keep in mind that this is simply a fundamental estimate, and there are a number of factors. If your house’s first floor has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in San Jose, CA 95110

professional should use you an quote once you’ve discussed the standard plan and gone over model possibilities. As always, acquire written estimates from numerous service providers. The only exception would be if you’re setting up a/c in a brand-new home, given that the builder will more than likely manage it.

Don’t be hesitant to look for clarifying information or request expenditure breakdowns when dealing with a home builder or independent HVAC specialist. Even if the professional is not able to information whatever, they must be ready to communicate sufficiently to assist you feel more at ease with the procedure.

Central Air Conditioner Installation in San Jose, CA 95110

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Rates vary based upon the regional market and the job details, as with any significant project. For labor and materials, a common split system central air conditioning installation using an existing heater could cost between $3,000 and $7,000 or more. Typically, that expense will be split around 60/40, with labor accounting for majority of it.

However, remember that you will more than likely be paying complete retail rather than receiving a commercial discount rate, so the whole expense of the job may not be cheaper than the contractor’s quote. You’ll also have to perform your own sizing, and you’ll be held liable if there are any problems with the equipment.

get rid of and dispose of the old system and refrigerant if you’re replacing an existing central air conditioning system. When building a heater and air conditioning system, the cost of each component is regularly reduced, while the general expense of the work is higher.

Central AC Installation in San Jose, CA 95110

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in San Jose, CA 95110

Call 855-608-3406 Now!

Central Air Conditioner Installation in San Jose, CA

Tel:855-608-3406

Main address: PO Box 363348 San Jose, CA
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in San Jose, CA

Call 855-608-3406 Now!

Additional HVAC Services in San Jose Ca 95110 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.