Central Air Conditioner Installation in Seattle, WA 98103

For the fantastic bulk of houses, central air installation is complicated and stuffed with danger to try without expert help. This is owing to the expertise necessary, the governmental wrangling of consents and licensing requirements, and the threat of voiding warranties if the elements are installed incorrectly.

What do Central Air Conditioners do?

A central air conditioning conditioner cools air in one spot prior to dispersing it throughout the home using the furnace’s air handling capabilities. This sets it apart from window or wall a/c unit or mini-split systems, which all chill fairly small locations and need many units to cool the entire home.

Many single-family houses in the United States with central air conditioning utilize a split system. This implies that the device is divided into two parts: an evaporator coil within a compressor and the home exterior.

Central Air Conditioner Installation in Seattle, WA 98103

Working With Professional Central Air Conditioner Installers in Seattle, WA

When consulting with specialists, ask about their approach to the task. Likewise, take notice of the questions they ask! An installer needs to ask clarifying questions so that your decisions and preferences are represented in their price quote and completion result.

Planning for Central Air Installation in in Seattle

Setting up central air conditioning is a big undertaking that requires substantial preparation ahead of time. Demand that your contractor examine their procedure and confirm that they will handle any required authorizations or other crucial paperwork.

Talk about with your professional just how much you worth energy efficiency above initial expense. This is also an excellent moment to discuss the position of the condenser unit and the type of thermostat you pick.

Sizing for your Central Air Conditioner

Your specialist will help you in determining the suitable size central air conditioning conditioner for your home. A system that is too small will run practically continually, whereas a unit that is too big will chill the house too rapidly and shut down prior to finishing a full cycle.

The quick on/off in the latter situation is taxing on the system. It can cause the evaporator coil to freeze, and a frozen coil prevents air from flowing. As a result, a huge a/c unit may be less reliable at cooling than a smaller sized system.

Your Air Conditioner installation will do a estimation called a “Manual-J” to determine finest unit for your house. This will take into consideration all of the criteria we’ve discussed and more, resulting in the most exact size possible.

However, we understand that numerous house owners like to have a basic notion of what size they need ahead of time. Here’s a rough estimation of central air conditioner size: To get the Btu essential, multiply the square video of your home’s conditioned area by 25, then divide by 12,000 to acquire the tonnage.

Keep in mind that this is merely a basic quote, and there are a number of factors. If your home’s first flooring has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Seattle, WA 98103

Once you’ve gone over the standard strategy and talked about design possibilities, the specialist should provide you an quote. As always, obtain composed quotes from numerous service providers. The only exception would be if you’re setting up cooling in a brand-new home, considering that the builder will probably handle it.

When working with a contractor or independent HVAC specialist, don’t be reluctant to seek clarifying details or demand expenditure breakdowns. Even if the professional is unable to information everything, they ought to be prepared to interact adequately to help you feel more at ease with the procedure.

Central Air Conditioner Installation in Seattle, WA 98103

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Costs differ based upon the regional market and the job details, similar to any considerable task. For labor and products, a normal split system central air conditioning installation utilizing an existing furnace could cost in between $3,000 and $7,000 or more. Typically, that expense will be divided around 60/40, with labor accounting for most of it.

Bear in mind that you will most likely be paying full retail rather than receiving a industrial discount rate, so the entire expense of the project might not be cheaper than the contractor’s quote. You’ll also have to perform your own sizing, and you’ll be held responsible if there are any problems with the equipment.

If you’re replacing an existing central air conditioning system, anticipate an additional rate to remove and get rid of of the old system and refrigerant. When constructing a heater and air conditioning system, the cost of each part is regularly reduced, while the general cost of the work is greater.

Central AC Installation in Seattle, WA 98103

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Seattle, WA 98103

Call 855-608-3406 Now!

Central Air Conditioner Installation in Seattle, WA

Tel:855-608-3406

Main address: PO Box 843840 Seattle, WA
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Seattle, WA

Call 855-608-3406 Now!

Additional HVAC Services in Seattle Wa 98103 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.