Central Air Conditioner Installation in Silver Spring, MD 20904

For the fantastic majority of homes, central air conditioning installation is complex and fraught with risk to attempt without skilled help. This is owing to the expertise necessary, the administrative wrangling of approvals and licensing requirements, and the danger of voiding service warranties if the components are set up mistakenly.

What do Central Air Conditioners do?

A central air conditioning conditioner cools air in one spot before dispersing it throughout the house utilizing the furnace’s air handling capabilities. This sets it apart from window or wall air conditioning unit or mini-split systems, which all chill reasonably small areas and need numerous units to cool the whole house.

Many single-family houses in the United States with central air utilize a split system. This suggests that the device is divided into 2 parts: an evaporator coil within a compressor and the house exterior.

Central Air Conditioner Installation in Silver Spring, MD 20904

Working With Professional Central Air Conditioner Installers in Silver Spring, MD

When speaking to professionals, ask about their approach to the task. Pay attention to the questions they ask! An installer should ask clarifying questions so that your choices and choices are represented in their quote and completion result.

Planning for Central Air Installation in in Silver Spring

Installing main air conditioning is a big endeavor that requires substantial preparation ahead of time. Demand that your specialist inspect their treatment and validate that they will deal with any needed permits or other crucial documents.

Talk about with your specialist just how much you worth energy efficiency above initial expenditure. This is likewise an outstanding moment to discuss the position of the condenser unit and the kind of thermostat you select.

Sizing for your Central Air Conditioner

Your contractor will assist you in determining the suitable size central air conditioner for your home. A system that is too little will run practically constantly, whereas a unit that is too large will chill the home too rapidly and shut down prior to finishing a complete cycle.

The fast on/off in the latter situation is taxing on the system. It can trigger the evaporator coil to freeze, and a frozen coil prevents air from flowing. As a result, a big a/c may be less efficient at cooling than a smaller unit.

Your Air Conditioner installation will do a estimation referred to as a “Manual-J” to identify the very best system for your house. This will consider all of the criteria we’ve mentioned and more, leading to the most accurate size possible.

We comprehend that many house owners like to have a basic idea of what size they require ahead of time. Here’s a rough evaluation of main air conditioner size: To get the Btu essential, multiply the square footage of your house’s conditioned location by 25, then divide by 12,000 to acquire the tonnage.

Keep in mind that this is simply a standard estimate, and there are a number of aspects. If your house’s very first flooring has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Silver Spring, MD 20904

When you’ve gone over the standard strategy and talked about model possibilities, the professional must use you an estimate. As constantly, obtain written quotes from various providers. The only exception would be if you’re installing air conditioning in a new home, given that the contractor will more than likely handle it.

Do not be hesitant to look for clarifying details or request expense breakdowns when working with a contractor or independent HVAC professional. Even if the contractor is not able to detail everything, they must be ready to interact sufficiently to assist you feel more at ease with the procedure.

Central Air Conditioner Installation in Silver Spring, MD 20904

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Rates vary based on the regional market and the task information, similar to any substantial project. For labor and products, a typical split system central air conditioning installation utilizing an existing heating system could cost in between $3,000 and $7,000 or more. Usually, that expense will be split around 60/40, with labor accounting for most of it.

Nevertheless, bear in mind that you will probably be paying full retail rather than getting a industrial discount, so the entire cost of the project might not be more affordable than the contractor’s price quote. You’ll also have to perform your own sizing, and you’ll be held responsible if there are any issues with the devices.

dispose and get rid of of the old system and refrigerant if you’re replacing an existing main air conditioning system. When building a heater and air conditioning system, the cost of each component is regularly lowered, while the overall expense of the work is greater.

Central AC Installation in Silver Spring, MD 20904

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Silver Spring, MD 20904

Call 855-608-3406 Now!

Central Air Conditioner Installation in Silver Spring, MD

Tel:855-608-3406

Main address: PO Box 233638 Silver Spring, MD
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Silver Spring, MD

Call 855-608-3406 Now!

Additional HVAC Services in Silver Spring Md 20904 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.