Central Air Conditioner Installation in Staten Island, NY 10310

For the great bulk of homes, central air conditioning installation is complex and fraught with danger to attempt without professional support. This is owing to the know-how required, the bureaucratic wrangling of consents and licensing requirements, and the danger of voiding guarantees if the elements are installed mistakenly.

What do Central Air Conditioners do?

A central air conditioning conditioner cools air in one area prior to dispersing it throughout the residence utilizing the furnace’s air handling capabilities. This sets it apart from window or wall ac system or mini-split systems, which all chill relatively small areas and require many units to cool the whole home.

The majority of single-family houses in the United States with main air use a split system. This suggests that the gadget is divided into 2 parts: an evaporator coil within home and a compressor outside.

Central Air Conditioner Installation in Staten Island, NY 10310

Working With Professional Central Air Conditioner Installers in Staten Island, NY

When speaking with contractors, ask about their method to the job. Likewise, take note of the concerns they ask! An installer must ask clarifying concerns so that your preferences and decisions are represented in their price quote and the end outcome.

Planning for Central Air Installation in in Staten Island

Setting up main air conditioning is a big undertaking that needs substantial preparation ahead of time. Demand that your professional check their procedure and validate that they will handle any needed licenses or other important paperwork.

Discuss with your contractor just how much you value energy performance above preliminary expenditure. This is also an excellent minute to discuss the position of the condenser system and the type of thermostat you select.

Sizing for your Central Air Conditioner

Your contractor will help you in identifying the proper size central air conditioning conditioner for your house. A unit that is too small will run almost continually, whereas a system that is too big will chill the home too quickly and shut down prior to finishing a complete cycle.

The fast on/off in the latter scenario is taxing on the system. It can cause the evaporator coil to freeze, and a frozen coil avoids air from streaming. As a result, a huge a/c unit may be less reliable at cooling than a smaller system.

Your Air Conditioner installation will do a computation referred to as a “Manual-J” to recognize the very best unit for your house. This will take into account all of the criteria we’ve pointed out and more, resulting in the most accurate size possible.

We comprehend that many house owners like to have a general notion of what size they need ahead of time. Here’s a rough evaluation of main air conditioner size: To get the Btu needed, increase the square footage of your house’s conditioned area by 25, then divide by 12,000 to get the tonnage.

Keep in mind that this is merely a standard quote, and there are a number of factors. If your home’s first floor has 12-foot ceilings, the air conditioner will have more air to chill.

Getting an Estimate for a Central Air Conditioner in Staten Island, NY 10310

specialist ought to use you an price quote once you’ve gone over the standard strategy and talked about design possibilities. As constantly, acquire composed price quotes from different service providers. The only exception would be if you’re setting up a/c in a brand-new home, considering that the home builder will more than likely handle it.

Do not be hesitant to seek clarifying information or demand expense breakdowns when dealing with a builder or independent HVAC contractor. Even if the contractor is unable to information everything, they need to be prepared to communicate adequately to assist you feel more at ease with the treatment.

Central Air Conditioner Installation in Staten Island, NY 10310

The Central Air Installation Process

It should take around a day to complete the installation. The major steps are summarized here.

  • Duct work installation or modification
    • Any duct work should be limited in homes with existing furnaces or air conditioning, generally no more than an extra return line.
    • If ducts must be placed, work with your contractor to disguise them in closets or soffits to minimize expensive drywall repairs.
    • Duct work should be done before drywall is put in new construction.
  • Interior unit
    • The evaporator coil is installed within the furnace plenum.
      • The plenum is the part of the furnace on each side of the air handler where air enters and exits the home.
      • The evaporator coil will enter the supply plenum, which serves as the furnace’s “outflow.”
  • Exterior unit
    • Several considerations influence the positioning of the outside unit, including:
      • The distance between the inside unit and the electrical service panel;
      • The levelness of the ground;
      • The proximity of the loud external unit to windows or doors;
      • Distances needed by code from gas or water meters (refer to your local building department for specifics).
  • Connect the line set
    • A pair of copper pipes connects the two parts of a split system, forming the direction the refrigerant will take.
    • The most direct route from the evaporator to the condenser will primarily decide the course of the line set.
      • If you have any issues regarding the route, communicate them to the contractor as soon as possible.
      • To avoid water infiltration, the penetration to the external should be sealed.
  • Connect the Electrical Supply
    • An outside cutoff will be required for the condenser unit.
    • The electrical line will connect the condenser to the shutdown, then to the electrical service panel.
    • If your circuit panel is already overloaded, you may need to update it to withstand the extra demand of the air conditioner.
      • If the project was planned properly, any work on the panel should already be included in the project estimate.
    • There will also be a low-voltage wire connecting the condensing unit to the furnace so it can be controlled by the thermostat.
  • Condensate Drain Line
    • All air conditioners generate condensation, much like the sides of a glass of ice water. That condensation needs to be drained.
    • Units located in a basement typically run to a floor drain.
    • Units located in attics may pipe water outside, or may use a drain pan that allows water to evaporate — the same way refrigerators allow condensation to evaporate.
  • Thermostat
    • When installing central air conditioning in a new home, you must select a thermostat.
    • If you’re retrofitting central air conditioning into an older home, you may need to replace the thermostat with one that can also manage cooling.
    • This is one phase in the process that is ideal for a little do-it-yourself effort.
      • Some homeowners buy a basic thermostat for the installation and subsequently upgrade to a programmable or smart thermostat on their own.

How Much Does Central Air Installation Cost?

Prices vary based upon the local market and the job information, as with any considerable task. For labor and supplies, a normal split system central air conditioning installation using an existing heating system could cost between $3,000 and $7,000 or more. Usually, that expense will be divided around 60/40, with labor accounting for most of it.

Bear in mind that you will most likely be paying complete retail rather than getting a industrial discount, so the entire expense of the project might not be less expensive than the specialist’s estimate. You’ll also need to perform your own sizing, and you’ll be held accountable if there are any problems with the devices.

eliminate and get rid of of the old system and refrigerant if you’re changing an existing main air conditioning system. When building a furnace and air conditioning system, the cost of each element is frequently reduced, while the overall expense of the work is greater.

Central AC Installation in Staten Island, NY 10310

Repair/Retrofit vs New Unit Installation

If boiler replacement is likely within the next few years or if you intend on transitioning to a new home heating system, you might want to give some thought to skipping the boiler retrofit and go right to setting up a brand new energy-efficient, eco-friendly heating system.

Central AC Installation in Staten Island, NY 10310

Call 855-608-3406 Now!

Central Air Conditioner Installation in Staten Island, NY

Tel:855-608-3406

Main address: PO Box 994531 Staten Island, NY
United States

Find a Central Air Conditioner specialist for buildings of all types from homes of all sizes to condo complexes, apartment buildings and offices in Staten Island, NY

Call 855-608-3406 Now!

Additional HVAC Services in Staten Island Ny 10310 Include:

Heating Services

Full-service heating services, new installs and repairs, service all makes and models, fast emergency service.

  • Boilers and Radiators - New Install
  • Boilers and Radiators - Repair
  • Commercial Heat - New Install
  • Commercial Heat - Repair
  • Electric Heat - New Install
  • Electric Heat - Repair
  • Furnaces - New Install
  • Furnaces - Repair
  • Gas Heat - New Install
  • Gas Heat - Repair
  • Geothermal Systems
  • Heat Pumps - New Install
  • Heat Pumps - Repair
  • Heating - New Install
  • Heating - Repair
  • Oil Heat - New Install
  • Oil Heat - Repair
  • Radiant Floor Systems

Air Conditioning Services

Full-service central air conditioning services, new installs, and repairs, service of all makes and models, and fast emergency service.